|
Same issue
i have a 1984 380se that keeps eating fuel pump relay modules i would be grateful for any advice why
i have a1980 380se that keeps eating fuel pump relay modules.i have replaced the fuel pump and filter so pressure is fine.after 500 or so ks it starts missing then another 100 or so it wont start.put a new relay in and away it goes.i have even had a mate replace the chips in the relay but that didnt work.i would be very grateful for any advice
Last edited by jagsy; 03-13-2008 at 07:46 AM.
Reason: merged threads
|
Linear Mode
