Mercedes-Benz Forum - View Single Post - No start-PLEASE HELP!!!
View Single Post
post #1 of Old 05-21-2017, 04:41 PM Thread Starter
Donnell Luckie Jr.
Junior Member
Join Date: May 2017
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
(Thread Starter)
Exclamation No start-PLEASE HELP!!!

Car has no start, can jump from SAM. Once started car is limp mode. I'm using a scanner called Icarsoft mbII for diagnostic. I had a general code of P1747, but the scanning of the EGS gives me a DTC of 008. I have changed the conductor plate, connector, checked for trans leaks, cleaned the EGS and connector on both ends. I did a live data stream and found that the Y3/6s1 starter lockout contact is closed, which is located on the conductor plate. I've checked all relays and fuses pertaining to starting, still no start. I've also noticed that my gears are not showing on the dash, when I jump it from the SAM. I've even tried resetting the EGS but the code comes right back.

Is there a starter lockout relay? Should I trying resetting with a different diagnostic machine or is it something else more serious? All comments and opinions are appreciated. Thanks!!
Donnell Luckie Jr. is offline  
For the best viewing experience please update your browser to Google Chrome