Benz Forum banner
Status
Not open for further replies.

97 e320 stalls?

3K views 1 reply 2 participants last post by  Stewmeistr 
#1 ·
I've got a 97 e320 stalls out, ETS light goes on then stalls, after some down time it starts right up. Anyone else experience this?
I'd be mighty grateful to know the answer to this problem.

Thanks
 
#2 · (Edited)
Hey, my 97' did the same thing. I had suggestions from the crank position sensor to the map sensor to the o2 sensors to the maf sensor. I did a code search on it and it would come up with a general 0100 code which would refer to the maf sensor. Well, I replaced the maf and it runs like a champ. Thats not to say that there isn't something else, but from shutting off and doing exactly like yours is, to running smoothly.. I'd say give it a look.

next i'd look at the crank pos. sensor.

Good luck,
STEW

I don't know forum rules as far as giving a nod to a good place, but https://www.autohausaz.com was terrific, for this sensor. The ebay sensors are junk. trust me on that one......
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top