Benz Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
hello every body i got 98 c280 and gas pedal is not responding and i got bas and est light on. i pulled codes with siple scaner it was only for mas air flow sensor,and it gat replaced but problerm is still there please any one has idea let me know.
 

·
Registered
Joined
·
678 Posts
The problem is the ME control module isn't communicating with the ESP/BAS control module. This happens alot when you reset mixture adaptions while the battery is low on charge. I've always been able to repair it by connecting a battery charger, then resetting adaptions once again. It's simply some kinda of software error. I have no idea why it happens. And if you don't have means of resetting the mixture adaptions by means of a scan tool, then I'm not really sure how you would go about fixing it. Perhaps you can maybe disconnect the battery for a little bit. Maybe it'll fix it. I'd suggest making sure the battery has a full charge when you reconnect it, just in case.
 
1 - 4 of 4 Posts
Top