Benz Forum banner

21 - 30 of 30 Posts

·
R.I.P Always Remembered
Joined
·
1,865 Posts
Now I understand what has happened, you need to locate and replace the pyro fuse as it is designed to kill all the cars power in the event of an accident. It is shown in wis but there is no location given for it, I suspect it is in the trunk near the battery and there is an image of it in the attachments;
 

Attachments

·
R.I.P Always Remembered
Joined
·
1,865 Posts
Until you locate and replace the pyro fuse and thus allow full battery power you will not be able to program the SRS control module.
 

·
Registered
Joined
·
2 Posts
Dear all,

Please give some idea, I have S400 Hybrid after motobike hit the door and all the side airbag exploded. I have installed all new airbag and module but the airbag light illuminated.

My concern that the car cannot start the engine at all, I have parked this car over 3 months and I concern if the hybrid battery will be damaged also.

1- How can we start the engine again after the crash? Any reset button ?
2- Can we charge the hybrid battery if the car cannot start? Through battery charger or something?
3- Can it be SRS light preventing from vehicle starting?

I have checked with the local garage but seem he cannot make it work again. SRS light still on because the SRS module is not yet code.

Expect to get some input....

Best regards,
SOmbo
Hi This is Igor,I have a 2010 s400 and I’m a a pyro fuse error in my srs screen,would you be able to help me out and let me know where the pyro fuse is blown?
 
21 - 30 of 30 Posts
Top