Benz Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
:?: Hi friends. My transmission (722.361) was not upshifting. Governor pressure was zero. I removed the governor, and found out that the pin that secure the worm gear in place was sheared. I opened the secondary pump and found the piston was broken at the coupling with the governor, and there was a piece of plastic and a small spring (20mm long, 7 mm diam and 0.3 mm thick) stuck between the pump gears at one of the ports (I guess is the pump suction). I have heard of other people that have had the same problem. Does someone have an idea of where did this spring could come from? Please reply if you have any information. Thank you in advance.

Darrel
 
1 - 1 of 1 Posts
Top