Benz Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
2022 GLC300W - 3 days old. When I run over a small bump,manhole cover etc. The stearing wheel and vehicle shudders and vibrates for
around 3 to 5 seconds after the bump. It seems to be getting worse. Is this dangerous and does anyone know what causes it.
 

·
Registered
Joined
·
65 Posts
2022 GLC300W - 3 days old. When I run over a small bump,manhole cover etc. The stearing wheel and vehicle shudders and vibrates for
around 3 to 5 seconds after the bump. It seems to be getting worse. Is this dangerous and does anyone know what causes it.
Loose tie-rods?
Don't drive it. Have it inspected immediately.
 

·
Registered
Joined
·
4 Posts
This seems to be a common issue with the GLC300W. Luckily, it's an easy fix. Here are the steps to take:

1. Loosen the bolts on the steering wheel with a wrench.
2. Remove the steering wheel from the car.
3. Clean off any dirt or debris that may be caught in between the wheel and shaft.
4. Apply some silicon lubricant to both surfaces and reattach the steering wheel.
5. Tighten the bolts back up with the wrench.
 
1 - 3 of 3 Posts
Top