Benz Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 1999 ml 450 and the sunroof is grinding in the back. I took all the parts down and the cables have bends on them and another is disconnected. What is the fix for this?does it matter if the cables are bent? Any advice would be appreciated.-619BIGAL
 

·
Registered
Joined
·
113 Posts
I wouldn't think bent is a big deal but disconnected apparently is. Got any pix to post?
And when you say grinding, you mean sounds like it has sand in the tracks or like the motor is grinding?
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Sorry I don't have any pics to upload but it is the motor grinding. I took the two motors off and it stopped. Also the cables were out of the cylinder and one is like out on one side.
 

·
Registered
Joined
·
13 Posts
Hopefully MB has all the parts available for that. When my Avalanche had a broken part in the sunroof GM told me I had to buy the complete assembly, no parts serviced separately. Id get a parts diagram so you know exactly where everything goes.
 
1 - 5 of 5 Posts
Top